中文版 English
GGJ低压无功补偿装置
相关信息

所属公司:景光电气有限公司
点击率:
更新时间:2019-06-22 17:05:51

联系我们

电话:0576-87617777
传真:0576-87727888
网址:http://www.
地址:浙江省 台州市仙居县福应街道永安工业集聚区

产品详情

概述 Overview

GGJ 低压无 功智能补偿装置采用计算机辅助设计(CAD),引入微电脑控制,对无功 量实行智能化跟踪补偿,其结构合理,技术先进,广泛应用于低压电网,提高功率因数,减少无功损耗,改善供电质量,是新一代的节电产品。专用于容130-600KVA 三相变 压器的无功功率补偿。

GGJ low-voltage reactive power compensation device using computer-aided design (CAD), the introduction of microcomputer control, intelligent implementation of intelligent tracking compensation, its reasonable structure, advanced technology, widely used in Low-voltage power grid, improve power factor, reduce reactive

power loss, improve power supply quality, is a new generation of energy-saving products. Dedicated to the 130-600KVA three-phase transformer reactive power compensation.


型号及含义 Model and meaning

8.jpg


工作条件 Working conditions

◆ 海拔高度:≤ 2000m;

◆ 环境温度:-20℃ ~+45℃;

◆ 相对湿度:20℃时≤ 90%;

◆ 安装环境:无有害气体和蒸汽,无导电 性或爆炸性尘粒及严重霉菌。

◆ altitude: ≤ 2000m;

◆ Ambient temperature: -20 ℃ ~ +45 ℃ ;

◆ relative humidity: ≤ 90% at 20 ℃ ;

◆ installation environment: no harmful gases and steam, no conductive or explosive dust and serious mold.


主要特点 Main feature

◆采用智能控制器控制,功能齐全,。性能可靠,补偿方式自动;可将功率因数提高致0.9 以上;

◆实时显 示电网功率因数,显示范围:滞后(0.00-0.99),超前 (0.00-0.99);

◆具有过电压、过谐波、过补偿、系统故障、缺相、过载等 多种综合保护功能;

◆记忆已设定的参数,系统停 电后不会丢失参数,电网恢复正常后,自动进入运行状态,无须人员值守;

◆可根据 电网负荷平衡状况,采取分 相补偿或混合补偿;

◆抗干扰能力强,能抵御 从电网直接输入的幅值2000V 干扰脉冲,高于国家专业标准。

◆ Intelligent controller control, full-featured,. Reliable performance, automatic compensation; can increase the power factor to 0.9 or more;

◆ real-time display power grid power factor, display range: lag (0.00-0.99), ahead (0.00-0.99);

◆ with over-voltage, harmonic, over compensation, system failure, lack of phase, overload and other comprehensive protection;

◆ memory has been set parameters, the system will not lose the parameters after power failure, the grid back to normal, automatically enter the running state, no personnel on duty;

◆ According to the grid load balance, to take the phase compensation or mixed compensation;

◆ anti-interference ability, can withstand the direct input from the grid amplitude of 2000V interference pulse, higher than the national professional standards.


主要技术参数 The main technical parameters

◆额定电压:0.38-0.66kV;

◆额定频率:50Hz;

◆额定容量:1-600kvar;

◆适用电压范围:(0.85-1.1) 倍额定电压;

◆最大允许电流:1.3 倍额定电流;

◆控制回路:1-16 回路;

◆投切时间:1-150S /次,可调;

◆工作方式:自动,连续运行。

◆ Rated voltage: 0.38-0.66kV;

◆ Rated frequency: 50Hz;

◆ Rated capacity: 1-600kvar;

◆ Applicable voltage range: (0.85-1.1) times the rated voltage;

◆ maximum allowable current: 1.3 times the rated current;

◆ control circuit: 1-16 loop;

◆ switching time: 1-150S / times, adjustable;

◆ work: automatic, continuous operation.


可配电网检测功能 Distribution network detection function

◆实时测 量和整点纪录变压器低压侧的三相电压、电流、频率、有功功率、无功功率、功率因数、有功电度、无功电度;电压电流总畸变率和2-25次谐波含量;

◆具有RS-232 和RS-485 接口,可进行 掌上电脑数据抄录,也可通 过远程通讯功能实现无线抄表,装置测试,参数设 置和时实测量数据及纪录数据的读取;

◆数据分析功能:可对运 行负荷数据进行分析处理、统计查询;综合分析供电质量,计算电压合格率,供电负荷率,可靠率及最大负荷率;

分时段查询功率因数、有功功率和无功功率;绘制各相电压、电流、功率因数等曲线图;打印综 合分析及统计报表。

◆ real-time measurement and the whole point of the record transformer low-voltage side of the three-phase voltage, current, frequency, active power, reactive power, power factor, active power, reactive power; voltage and current total distortion rate and 2-25 Subharmonic content;

◆ RS-232 and RS-485 interface, can be handheld computer data copy, but also through the remote communication function to achieve wireless meter reading, device testing, parameter settings and time measurement data and records Data reading;

◆ data analysis function: the operation load data can be analyzed and processed, statistical query; comprehensive analysis of power supply quality, calculate the voltage pass rate, power supply load rate, reliability and maximum load rate; Query power factor, active power and reactive power; draw each phase voltage, current, power factor curve; print comprehensive analysis and statistical reports.


户外柱上安装方式(下图) Outdoor column installation (below)

9.jpg